OK, did a little more work on the table. The garage floor is anything but level, and I realized I needed some of those twisty furniture legs ( otherwise known as threaded tube ends.) After spending an hour looking for the tube ends I suddenly remebered something... I HAVE A WELDER! So, I cut some end plates...
Welded on a couple of nuts...
Which completeley gunked up the threads...
So, I tapped them back out...
Screwed in a thingy bolt that I found wandering around ACE. (use the local guys whenever possible)
And voila!.. It won't hold up too much weight, but it should be OK for what I need.
Welded on a couple of nuts...
Which completeley gunked up the threads...
So, I tapped them back out...
Screwed in a thingy bolt that I found wandering around ACE. (use the local guys whenever possible)
And voila!.. It won't hold up too much weight, but it should be OK for what I need.
